ethtool

1
2
3
4
5
6
7
8

ethtool ethx       //查询ethx网口基本设置，其中 x 是对应网卡的编号，如eth0、eth1等等
ethtool –h         //显示ethtool的命令帮助(help)
ethtool –i ethX    //查询ethX网口的相关信息 
ethtool –d ethX    //查询ethX网口注册性信息
ethtool –r ethX    //重置ethX网口到自适应模式
ethtool –S ethX    //查询ethX网口收发包统计
ethtool –s ethX [speed 10|100|1000] [duplex half|full]  [autoneg on|off]                                   
                   //设置网口速率10/100/1000M、设置网口半/全双工、设置网口是否自协商

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29

root@taylorwang-debug:~# ethtool eth1
Settings for eth1:
    Supported ports: [ TP MII ]
    Supported link modes:   10baseT/Half 10baseT/Full 
                            100baseT/Half 100baseT/Full 
                            1000baseT/Half 1000baseT/Full 
    Supported pause frame use: No
    Supports auto-negotiation: Yes
    Advertised link modes:  10baseT/Half 10baseT/Full 
                            100baseT/Half 100baseT/Full 
                            1000baseT/Half 1000baseT/Full 
    Advertised pause frame use: Symmetric Receive-only
    Advertised auto-negotiation: Yes
    Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                         100baseT/Half 100baseT/Full 
    Link partner advertised pause frame use: Symmetric Receive-only
    Link partner advertised auto-negotiation: Yes
    Speed: 100Mb/s
    Duplex: Full
    Port: MII
    PHYAD: 0
    Transceiver: internal
    Auto-negotiation: on
    Supports Wake-on: pumbg
    Wake-on: g
    Current message level: 0x00000033 (51)
                   drv probe ifdown ifup
    Link detected: yes
root@taylorwang-debug:~#